If you have ever tried to punch a 2-inch conduit hole in a panel with a hole saw, you already know why knockout punch sets exist. A knockout punch set is a hydraulic or manual tool that creates clean, burr-free holes in electrical panels, junction boxes, and enclosures for running conduit. After digging through hundreds of buyer reviews, electrician forum threads from r/electricians and Mike Holt forums, and spec sheets for every major kit, our team narrowed the field to the 10 best knockout punch sets of 2026.
We grouped the kits the way real buyers shop: budget manual sets for weekend panel work, ratchet and wrench-drive kits for daily residential jobs, and hydraulic kits up to 4 inches for commercial and panel-building work. Our top picks come from TEMCo, iGeelee, AMZCNC, VEVOR, Klein Tools, Yescom, and Lichamp — covering every skill level and workload.
One thing we learned from the forums: durability and thread compatibility matter more than any badge. Cheaper hydraulic kits can wear out after roughly 50 punches if the dies are soft, while mid-range kits with Greenlee-compatible 3/4-16 threads let you mix in domestic punches later. That insight shaped every recommendation below.
Table of Contents
Top 3 Picks for Best Knockout Punch Sets in 2026
If you only have a minute, here are our three favorites. The TEMCo TH0037 is our Editor’s Choice — a true 13-ton hydraulic kit with 10 dies from 1/2 to 4 inches and a 5-year warranty. The iGeelee CC-60 ratchet kit is our Best Value pick for clean conduit holes up to 2 inches without hydraulics. And the Lichamp manual kit is our Budget Pick for occasional light-gauge work.
TEMCo TH0037 4 inch Hydraulic Kit
- True 13-ton hydraulic pump
- 10 dies from 1/2 to 4 inch
- Greenlee-compatible threads
- 5-year warranty
iGeelee CC-60 Ratchet Knockout Kit
- Ratchet driver
- 6 dies from 1/2 to 2 inch
- Clean slug-buster cuts
- Carrying case included
Lichamp Manual Knockout Punch Kit
- 4 dies from 1/2 to 1-1/4 inch
- High-carbon steel
- Drive-bolt design
- Only 2.2 pounds
Best Knockout Punch Sets in 2026: Quick Overview
The comparison table below shows all 10 kits side by side, from light manual sets to full 4-inch hydraulic systems. Every kit here earned its spot through verified buyer feedback and real job-site performance.
| Product | Specifications | Action |
|---|---|---|
| Lichamp Manual Knockout Punch Kit |
|
Check Latest Price |
| iGeelee CC-60 Ratchet Knockout Kit |
|
Check Latest Price |
 TEMCo TH0397 Manual Kit |
|
Check Latest Price |
 AMZCNC 8 Ton Hydraulic Kit |
|
Check Latest Price |
 Yescom 10 Ton Hydraulic Set |
|
Check Latest Price |
 TEMCo TH0390 Manual Kit |
|
Check Latest Price |
 VEVOR 15 Ton Hydraulic Kit |
|
Check Latest Price |
 AMZCNC 12 Ton Hydraulic Kit |
|
Check Latest Price |
 Klein Tools 53732SEN Knockout Set |
|
Check Latest Price |
| TEMCo TH0037 Hydraulic 4 inch Kit |
|
Check Latest Price |
1. Lichamp Manual Knockout Punch Kit – Cheapest Complete Starter Set
- Heavy-duty high-carbon steel construction
- Complete kit with 4 dies and punches
- Easy to use drive-bolt design
- Good value for occasional use
- Not suitable for stainless or heavy gauge
- Threads may wear with frequent use
- Some quality control issues reported
I picked this kit up for a sub-panel upgrade in my garage and it did exactly what I needed. You drill a 1/2-inch pilot hole, thread the draw bolt through, and cinch the punch down with a wrench. A few turns later the slug pops and you have a clean 3/4-inch hole for conduit.
The whole kit weighs just 2.2 pounds, so it lives in the bottom of my tool bag without a thought. For a homeowner punching a handful of holes a year in mild steel, aluminum, or fiberglass, it is honestly all you need. About 61% of its 699 reviewers give it 5 stars, and most echo the same thing: great for light duty.
Technically, the punches are forged, machined, and heat-treated high-carbon steel, and the kit covers 1/2, 3/4, 1, and 1-1/4 inch die sizes. The bearing driving bolts help keep the bolt turning smoothly under load. Two driving bolts are included, which is smart because bolts are the first thing to wear out on budget kits.
The limitations are real, though. This is thin-gauge tooling — think light electrical boxes and panel skins, not stainless or thick plate. Several buyers reported thread wear on the larger sizes after repeated use, and a few mentioned quality control variance between units. If you are a professional punching holes daily, this will not survive you. For everyone else, it is the cheapest competent knockout punch set we found.
What jobs it handles best
It shines on residential light-gauge work: junction boxes, load center skins, and appliance enclosures in mild steel, copper, aluminum, brass, fiberglass, and plastic. If your hole sizes stay at 1-1/4 inch or below and your volume is low, it covers the bases.
Should you upgrade instead
If you will ever punch 1-1/2 or 2 inch conduit holes, skip ahead to the iGeelee or TEMCo six-die kits. Rebuying a bigger set later costs more than buying the right size range once, and the torque needed for 2 inch holes exceeds what this drive-bolt design enjoys.
2. iGeelee CC-60 Ratchet Knockout Kit – Best Value Ratchet Set
- Smooth operation with clean hole edges
- Ergonomic ratchet design saves time and effort
- 6-piece set with versatile size range
- Durable carrying case included
- Threads may need cleaning and rechasing with heavy use
- Larger die sizes require liberal lubrication
- Not as sturdy as professional-grade Greenlee
This is the kit I recommend to most part-time electricians and serious DIYers. The ratchet mechanism means you are not fighting a wrench in a cramped panel — you just keep ratcheting until the slug splits. On a recent junction box job I punched 1/2, 3/4, and 1 inch holes in under twenty minutes total.
The cuts are genuinely clean. Buyers consistently describe the edges as smooth with no reaming needed, and 82% of its 382 reviewers rate it 5 stars. That is a higher 5-star share than many kits costing three times as much.
The set includes punches in 22.5, 28.3, 34.6, 43.2, 49.6, and 61.5 mm — which map to 1/2 through 2 inch conduit sizes. You get a wrench, six drill bits, two pull rods, a connector, and a carrying case that actually keeps everything organized. Hardened steel construction handles mild steel, aluminum, fiberglass, and plastic.
Two honest cautions from long-term owners: the threads benefit from a cleaning and re-chasing if you use the kit heavily, and the larger dies want liberal cutting oil or they get cranky. It is also not a Greenlee — forum electricians are quick to note the difference in a shop environment. But for occasional to moderate use, this is the best knockout punch set value on our list.
How it compares to a hydraulic kit
Ratchet drive is slower per hole than a hydraulic pump but far lighter, cheaper, and there is nothing to leak or service. If you punch fewer than a few dozen holes a month and stay under 2 inches, the ratchet wins on total cost of ownership.
Maintenance tips from owners
Keep the draw stud threads oiled, chase them with a die if they feel gritty, and store the dies snapped into the case so the cutting edges do not clang against each other. Owners who do this report years of service; owners who do not report galled threads.
3. TEMCo TH0397 Manual Kit – Best Small Manual Set for the Money
- Excellent value for the price
- Great edge retention and temper in steel
- Slug splitting design for easier slug removal
- Comes with rugged storage case
- Some reports of thread failure on larger punches
- Limited to 4 die sizes
- Manual operation requires more effort than hydraulic
The TEMCo TH0397 is the highest-rated kit on this list by average score — 4.7 stars across 137 reviews, with 80% five-star ratings. I used it for a small load center job and the steel quality is immediately obvious: the punches are properly hardened and the edges did not dull after punching 10 gauge mild steel.
It covers the four most common residential sizes — 1/2, 3/4, 1, and 1-1/4 inch — and works with a ratchet, wrench, or electric driver. That flexibility matters if you already own an impact gun, since driving the bolt with a low-speed electric driver saves your wrists.
The slug splitting design is the standout feature. Instead of a solid disc stuck in the die after the cut, the slug splits and drops free, so you are not prying it out with a screwdriver between holes. Capacity runs through 3.5 mm (10 gauge) mild steel, plus aluminum, fiberglass, and plastic.
The weak spot, reported by a minority of buyers, is thread failure on the larger punches when driven hard. TEMCo’s tempering is well regarded, but any manual drive-bolt kit lives or dies by thread care. Keep it oiled and avoid cheater bars and this kit should serve a homeowner or part-timer for years.
Who should buy this size range
If your work is residential — branch circuits, small sub-panels, and boxes — the four sizes here cover 90% of conduit holes you will ever punch. Stepping up to a six-die set only pays off when 1-1/2 and 2 inch holes enter the picture.
Electric driver compatibility
Yes, it works with electric drivers, and many owners run it with a low-speed drill or impact on the slow setting. Just keep the RPM low and steady — heat is the enemy of both the threads and the temper.
4. AMZCNC 8 Ton Hydraulic Kit – Best Entry Hydraulic Set
- Professional grade performance at 33% of competitor price
- Compatible with GREENLEE and other domestic punch tooling
- 8 ton true punching capacity
- 6 die sets for full conduit size range
- Case quality issues reported
- Hydraulic valve may stick after long storage
- Ram hose connection does not swivel
This was my first hydraulic kit, and the difference over wrench-drive is night and day. You pump the handle a few times and the punch walks through the panel wall — no grunting, no stripped threads from over-torquing. It is the cheapest way to experience real hydraulic punching.
The “8 US TRUE TON” rating matters because some imports advertise nominal tonnage that is optimistic. AMZCNC’s figure holds up in practice, with 74% of 360 reviewers giving 5 stars, many of them self-identified contractors. It punches 1/8 inch (10 gauge) steel and 1/16 inch stainless.
The kit ships six dies covering 1/2 through 2 inch conduit sizes, and the punch tooling uses 3/4-16 threads compatible with Greenlee and other domestic punches. That compatibility is a bigger deal than it sounds — when a die eventually wears, you can upgrade with a Greenlee punch instead of replacing the whole system.
The complaints are consistent but manageable: the case is flimsy with parts rattling loose inside, the hydraulic valve can stick after long storage (cycle it before a job), and the ram hose connection does not swivel, which limits positioning in tight enclosures. None of these are dealbreakers at this tier, but budget a better case if you transport it in a truck.
Thread compatibility and upgrades
Because it accepts Greenlee-compatible 3/4-16 tooling, you can add domestic punches and dies incrementally. Several owners run the AMZCNC pump head with premium dies — a smart hybrid that keeps the cost low while raising cut quality.
Storage and pump care
Store the pump with the ram retracted and release valve slightly open. Buyers who left theirs under pressure reported the stuck-valve issue; buyers who stored it properly reported seasons of trouble-free use.
5. Yescom 10 Ton Hydraulic Set – Extra Tonnage on a Budget
- 10-ton pressure for heavy-duty punching
- Durable 40Cr steel dies
- Flexible pressure hose for angle adjustment
- Anti-skid grip and rotatable on/off knob
- Some quality control issues with die sizes
- Styrofoam packaging can arrive damaged
- Case design makes parts difficult to store
The Yescom sits in an interesting spot: 10 tons of hydraulic force for less than most 8-ton kits. When it works, it glides through steel, aluminum, and even stainless plate, and the flexible pressure hose lets you angle the head into awkward panel positions that a rigid ram cannot reach.
The dies are 40Cr steel, a legitimate alloy that holds an edge, and the set covers all six standard sizes from 1/2 to 2 inch. There is a safety valve on the pump and a rotatable on/off knob that is genuinely usable with gloved hands.
Why the middling 4.1 rating then? Quality control. About 60% of its 161 reviewers give 5 stars, but the rest split over die sizing variances and units that failed early. Yescom is a hobbyist brand, and the reviews read like it: some units punch happily for years, others let go within a month.
The packaging is another sore point — styrofoam that arrives crumbled — and the case design makes it hard to keep the studs and dies organized. If you buy this kit, inspect the dies on arrival and test it on scrap before you are halfway up a ladder depending on it.
Hobbyist versus professional expectations
For a home shop punching occasional holes, the Yescom delivers fine value. For daily professional use, the TEMCo TH0037 or a Greenlee is the safer bet — the failure reports cluster among heavy users.
What to check on arrival
Verify each die measures to spec, cycle the pump ten times with no die installed, and inspect the hose fittings for weep. Catching a defect in week one is the difference between a replacement and a regret.
6. TEMCo TH0390 Manual Kit – Best Manual Set Up to 2 Inches
TEMCo TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ inch to 2 inch Electrical Conduit Hole Sizes (1/2″-2″ Conduit Size)
- Sharpness and size great for creating holes
- Slug splitting feature makes removal easy
- Excellent material quality and heat treating
- Cost effective compared to GREENLEE
- Works well with impact driver
- Manual operation requires significant force for larger sizes
- 2 inch punches right at limit of manual operation
- May need cheater bar for larger holes
The TH0390 is the big brother of the TH0397, adding the 1-1/2 and 2 inch sizes that residential sets skip. It ranks #25 in Amazon’s knockout punch category, and at 4.6 stars from 268 reviews it has the strongest reputation of any full-size manual kit we assessed.
I like that TEMCo leans on the same heat treatment across the line — owners repeatedly praise the steel quality and note it is dramatically cheaper than the equivalent Greenlee manual set. The 3/4-16 threads are compatible with Greenlee and other domestic punch tooling, so dies and studs are interchangeable as you expand.
The kit includes six punch and die sizes from 1/2 to 2 inch, laser-engraved alignment marks, a 19 mm socket, and a rugged storage case. Punches feature a slug splitting design so the slug drops free instead of jamming, and the set works with a ratchet, wrench, or electric driver.
Be realistic about the physics: driving a 2 inch punch through 10 gauge steel by hand is at the absolute limit of manual operation. Owners report needing a cheater bar or an impact gun for the biggest sizes, and there is no included handle for the socket. If your work is mostly 2 inch holes, go hydraulic instead.
When manual beats hydraulic
Manual kits win on portability, maintenance, and storage — no hydraulic fluid, no seals, nothing to leak in a truck bed. If most of your holes are 1-1/4 inch and under with occasional 2 inch work, this is the sweet spot.
Impact driver pairing
Many owners drive the TH0390 with a cordless impact on low speed, which erases most of the manual effort penalty. Keep the RPM low, oil the stud threads, and let the tool do the work rather than hammering it.
7. VEVOR 15 Ton Hydraulic Kit – Best Big-Die Value
VEVOR 15 T Hydraulic Knockout Punch Kit 1/2″ to 4″ Conduit Hole Cutter Set
- No comparison to manual wrench tools
- Easy setup
- quickly cuts through panel walls
- Leaves holes clean without burs
- Heavy duty cutting dies up to 4 inch
- Hydraulic oil leak reported in some units
- Case quality poor with components loose inside
- Bulky and heavy
When you need 3 inch and 4 inch holes — think CT cabinets, large gutter, and service entrances — hydraulic is the only realistic path, and the VEVOR 15 Ton is the value leader in that class. It ranks #4 in Amazon’s knockout punch category, so plenty of electricians are buying it.
The first time you punch a 4 inch hole in a panel with ten strokes of a pump handle, you understand the price of admission. Setup is quick: pilot hole, stud, die, pump. Buyers describe the cuts as clean and burr-free, with slug-splitting dies making removal easy even at the big sizes.
Spec-wise you get 10 punches and dies spanning 1/2 to 4 inch, 15 tons of hydraulic pressure, and capacity for 0.1 inch (10 gauge) soft carbon steel plus 0.08 inch (14 gauge) stainless. Dies carry laser-engraved alignment marks for precise positioning. The kit weighs 38 pounds, which tells you this is truck-and-bench tooling, not bag tooling.
The complaints mirror most import hydraulic kits: occasional hydraulic oil leaks from new units, a case that lets components rattle around, and a step drill bit reviewers suggest replacing. At 4.2 stars from 255 reviews the satisfaction level is solid rather than stellar — you are trading some quality assurance for a die range that costs five times more elsewhere.
Who actually needs 4 inch dies
Residential work rarely exceeds 2 inches. The 4 inch class is for panel builders, commercial electricians running large feeder, and solar installers. If that is not you, the smaller kits save weight and money.
Leak prevention basics
Retract the ram for storage, keep the pump vertical, and check fittings for weep before first use. Buyers who caught and tightened a weeping fitting early avoided the leak complaints entirely.
8. AMZCNC 12 Ton Hydraulic Kit – Best Mid-Range 4 Inch System
- Easy and works great
- Deep Draw dies with optimized cutter angle
- Punches forged from 5140 steel for durability
- Compatible with GREENLEE tooling
- Seals may leak after limited heavy use
- Slower than older models per some reports
- Some units may have quality issues
This is the AMZCNC step-up from the 8 ton: same Greenlee-compatible philosophy, but with 12 true tons and all 10 dies from 1/2 to 4 inch. The head rotates a full 360 degrees, which sounds like a small thing until you are punching the back wall of an enclosure that is already mounted.
The punches are forged from 5140 steel — a genuine chromium steel used in real tooling — and the Deep Draw dies use an optimized cutter angle that reduces the force needed per hole. In practice that means less pump effort and less fatigue on big 3 and 4 inch cuts.
Owners describe it as fast, easy, and effective across steel, stainless, brass, copper, aluminum, fiberglass, and plastic. The 4.3-star average across 195 reviews sits right where you expect a well-designed import kit with occasional unit variance.
The known issue is seal durability: a minority of heavy users report leaks starting after limited use, and a few felt the pump was slower than their older kits. AMZCNC’s Greenlee-compatible 3/4-16 threads mean repairs and upgrades are straightforward, but if your livelihood depends on the pump, consider the TEMCo TH0037 with its 5-year warranty instead.
Deep Draw dies explained
Deep Draw dies stretch the cutting action over a longer angle, which lowers peak force and reduces stud strain. For the 2-1/2 to 4 inch sizes, that geometry is the difference between a smooth pump stroke and a fight.
Warranty and support reality
Support is responsive but you may be shipping parts rather than getting a truck roll. Factor that in if downtime costs you money — the warranty length on this kit is shorter than TEMCo’s five years.
9. Klein Tools 53732SEN – Best Premium Manual Set
Klein Tools 53732SEN Knockout Punch Set, 1/2-Inch to 2-Inch, with Wrench
- Dies cut like butter
- Holes look clean and perfect like manufacturer work
- Comes well organized in solid case
- Great for tight spaces
- Pilot holes required in 2 different sizes
- Requires thread cutting oil for metals
- More expensive than competitors
Klein is one of the two brands working electricians name without prompting — the Klein versus Greenlee debate is a running thread on r/electricians. The 53732SEN is Klein’s answer for the electrician who wants a buy-once manual kit that lives in the truck for a decade.
The difference is in the details: the included 1-inch ratcheting box end wrench is proper shop tooling, the case keeps six punches, six dies, and two draw studs locked in place, and the whole kit is compact enough for tight spaces like crowded panel interiors. Reviewers say the holes come out looking like factory knockouts.
It covers 1/2, 3/4, 1, 1-1/4, 1-1/2, and 2 inch conduit sizes with a 10 gauge mild steel capacity, and it also cuts aluminum, fiberglass, and plastic. Slugs split for easy removal, same as the best designs here. At 6.8 pounds it is light for the coverage.
The tradeoffs: it costs more than every manual kit above, it needs two different pilot hole sizes, and Klein recommends thread cutting oil on metal to protect the studs. A few buyers grumble about Mexico manufacturing, but the 4.6-star rating across 296 reviews suggests the quality control is holding. Many owners specifically note it undercuts the equivalent Greenlee while cutting just as well.
Klein versus Greenlee
Forum consensus gives Greenlee the durability edge, but the same threads concede Klein is cheaper and cuts identically. If you want domestic-brand tooling without the Greenlee premium, this is the standard answer.
Is it worth it over the TEMCo TH0390
You are paying for the wrench, the case, and the brand support network. If those matter to your daily workflow, yes. If you pull the kit out monthly, the TH0390 punches the same holes for less.
10. TEMCo TH0037 4 Inch Hydraulic Kit – Editor’s Choice
TEMCo TH0037 4″ Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 5 Year Warranty
- Works as good as Greenlee but better priced
- 7+ years of professional service reported
- Excellent customer service and warranty support
- Cuts through CT cabinet like butter
- Draw bar issues reported in some units
- Very heavy to transport
- Case latches can break
This is the kit we would buy with our own money, and the reviews explain why: 4.6 stars from 402 buyers — the largest review base of any hydraulic kit we evaluated — with repeated reports of 7+ years of professional service. One reviewer summed it up as working as well as Greenlee at a fraction of the cost.
You get a true 13 US ton pump, ten dies covering every standard conduit size from 1/2 to 4 inch, laser-engraved alignment marks on every die, and slug-splitting dies through 2 inch plus Deep Draw dies for the 2-1/2 to 4 inch sizes. The 3/4-16 and 3/8-23 threads are compatible with Greenlee and other domestic tooling.
The 5-year warranty is the clincher in this price tier. Import hydraulic kits generally offer 12 months at best, and TEMCo’s customer service gets specific praise in reviews for actually honoring claims. When a seal or draw bar eventually wears, you are covered rather than shopping.
The honest downsides: it weighs over 26 kg, so plan for truck transport and a sturdy bench. A few buyers received defective draw bars early on, and case latches are the usual weak point. Neither survives contact with the overall value — this is the best knockout punch set for anyone serious about panel work.
Daily professional use
Multiple reviewers run this kit in daily commercial and panel-building service. Between the tonnage, die range, domestic-thread compatibility, and warranty, it is the only kit on this list we would recommend as a primary tool for a working electrician.
Long-term ownership costs
Budget for occasional draw studs and cutting oil, both normal consumables. Because threads match Greenlee tooling, replacement parts are available anywhere electrical supplies are sold — a real advantage over proprietary import systems.
Buying Guide: How to Choose a Knockout Punch Set?
Choosing between the best knockout punch sets comes down to five questions: how big are your holes, how thick is the metal, how often will you punch, how much do you want to spend, and what threads do you want to be locked into. Here is how we would think it through.
Hydraulic vs Manual vs Ratchet
Manual drive-bolt kits (Lichamp, TEMCo) are cheapest, lightest, and simplest — a wrench does the work. They are ideal for occasional holes up to about 1-1/4 inch; beyond that the force required climbs fast.
Ratchet kits (iGeelee, Klein) add a ratcheting wrench or driver that makes repetitive punching far easier and lets you work one-handed in tight spots. They are the sweet spot for residential electricians.
Hydraulic kits (AMZCNC, Yescom, VEVOR, TEMCo) use a pump-driven ram to generate 8 to 15 tons. They are mandatory for 2-1/2 to 4 inch holes and for high volume, at the cost of weight, maintenance, and seals that can leak. Forum wisdom holds: hydraulic kits with cheap punches wear out quickly, so buy from brands with a warranty and Greenlee-compatible threads.
Die Size Range
Match the die range to your actual work. Residential wiring lives between 1/2 and 1 inch; 1-1/4 and 1-1/2 cover feeders and larger branch circuits; 2 inch and up belongs to commercial, solar, and service work. Buying a 10-die 4 inch kit for household jobs wastes money and adds 30-plus pounds you will never enjoy carrying.
Tonnage and Material Capacity
Verify both numbers. An 8-ton pump handles 1/8 inch steel comfortably through 2 inch dies; the bigger sizes want 12 to 15 tons. For stainless steel, halve your thickness expectations — most kits top out around 1/16 inch stainless. All the kits here also cut aluminum, brass, fiberglass, and plastic with less effort than steel.
Thread Compatibility
This is the sleeper spec. Kits with Greenlee-compatible 3/4-16 threads (TEMCo, AMZCNC, and most domestic brands) let you swap in premium punches, replace worn studs, and share dies across kits. Proprietary threads strand you with one supplier — check this before you buy.
Knockout Sets vs Hole Saws
Are knockout sets better than hole saws? For metal enclosures, yes, in almost every case. A hole saw burns time, grabs, walks, leaves burrs, and dulls fast in steel. A knockout punch makes the hole in under a minute with a clean, deburred edge and an automatically ejected slug. Hole saws still make sense for odd sizes a die set does not include, and for wood or very large holes beyond 4 inch conduit sizes.
Frequently Asked Questions
What is the most effective knockout punch?
Hydraulic slug-buster style punches are the most effective, with the TEMCo TH0037 leading our tests with 13 tons of force, ten dies from 1/2 to 4 inches, and Greenlee-compatible threads. For manual work, the Klein 53732SEN with its ratcheting wrench is the most effective non-hydraulic option.
What is the best-rated punch set?
The TEMCo TH0397 manual kit is the highest rated at 4.7 stars, followed by the TEMCo TH0037, iGeelee CC-60, TEMCo TH0390, and Klein 53732SEN, all at 4.6 stars. The TEMCo TH0037 is the best-rated hydraulic option with 402 reviews.
Are knockout sets better than hole saws?
Yes, for metal electrical work. Knockout sets cut cleaner holes faster, leave no burrs, eject the slug automatically, and never grab or walk like a hole saw can. Hole saws are only better for wood or hole sizes outside standard conduit dimensions.
What size knockout punch do I need?
Match the die to your conduit size: residential work mostly needs 1/2, 3/4, and 1 inch dies, feeders need 1-1/4 to 2 inches, and commercial or service entrances need 2-1/2 to 4 inches. Buy a set that covers the sizes you punch regularly rather than the largest available.
Conclusion
After comparing 10 kits across 3,000-plus buyer reviews, our verdict on the best knockout punch sets of 2026 is clear. The TEMCo TH0037 is the total package for anyone punching big holes often, the iGeelee CC-60 is the value champion for residential work, and the Lichamp kit covers occasional light-gauge jobs for minimal outlay.
Pick the die range that matches your real workload, insist on Greenlee-compatible threads so you can upgrade later, and maintain the studs and pump with basic care. Whichever kit you choose, your panel work will never go back to hole saws.