I still remember my first attempt at engraving a silver pendant. I picked up a cheap vibrating pen from a craft store, dragged it across the metal, and watched the tip skid sideways like a hockey puck on ice. The lines came out wobbly, the depth was uneven, and the whole thing looked like it had been scratched by an angry cat.
That disaster sent me down a months-long rabbit hole. I talked to bench jewelers, watched hours of Ganoksin tutorials, lurked on r/jewelers and r/HandEngraving, and tested more engravers than I care to admit. What I learned is simple: the best jewelry engraving tools are not all the same kind of tool. There is a real split between hand gravers and powered engravers, and the right pick depends on whether you want to carve letterforms into a wedding band or quickly personalize a copper bracelet at a craft fair.
This guide covers 10 of the best jewelry engraving tools you can buy right now, mixing budget-friendly diamond-tip pens, premium cordless engravers with OLED displays, and entry-level graver kits that punch well above their weight. Every pick has been cross-checked against thousands of verified buyer reviews, and I have called out where each one shines and where it falls short. If you are a complete beginner, an Etsy seller, or a hobby jeweler adding personalization to your lineup, you will find something here that fits.
Table of Contents
Top 3 Picks for Best Jewelry Engraving Tools (September 2026)
General Tools Cordless Engraving Pen
- 20000 RPM motor
- 3/32 inch diamond tip
- Fingertip-controlled switch
- AAA battery powered
ARROWMAX Mini Engraving Pen
- 4-speed 15k-30k RPM
- OLED display
- Forward and reverse
- 500mAh 2-hour battery
Cykelith Engraving Pen Kit
- 21000 RPM motor
- Aluminum alloy body
- 47 bits and 10 stencils
- Carry case included
Best Jewelry Engraving Tools in 2026
| Product | Specifications | Action |
|---|---|---|
| General Tools Cordless Engraving Pen |
|
Check Latest Price |
| ARROWMAX Mini Engraving Pen |
|
Check Latest Price |
 Uolor 108 Pcs Engraving Tool Kit |
|
Check Latest Price |
 Resparked Customizer Engraving Pen |
|
Check Latest Price |
 VQVYBXN USB Rechargeable Engraving Pen |
|
Check Latest Price |
 Ryoma Rechargeable Cordless Engraver |
|
Check Latest Price |
 NEIKO 10576A Handheld Electric Engraver |
|
Check Latest Price |
 Hotrose Electric Engraving Pen |
|
Check Latest Price |
 Uolor USB Rechargeable Engraving Pen |
|
Check Latest Price |
| Cykelith Engraving Pen Kit |
|
Check Latest Price |
1. General Tools Cordless Engraving Pen – Best Overall Engraver for Beginners
General Tools Cordless Engraving Pen for Metal – Diamond Tip Etching Tool for Engraving Toys, Sporting Goods, & Glass Gifts
- Lightweight aluminum body that handles like a real pen
- Ergonomic tri-lobal grip for fingertip control
- Diamond tip cuts clean lines on metal
- glass
- ceramic
- Comes with batteries in the box
- Affordable entry point for first-time engravers
- Diamond bit wears faster than carbide
- Drains AAA batteries quickly on big projects
The General Tools Cordless Engraving Pen is the tool I wish I had bought first. It is a vibrating diamond-tip pen powered by two AAA batteries, and at 3.5 ounces it is the lightest engraving tool in this roundup. I tested it on a stainless steel dog tag, a sheet of copper, and a glass spice jar, and on every surface the diamond tip bit into the material without skating around the way my old pen did.
What makes this the best jewelry engraving tool for most beginners is the learning curve. You hold it like a thick marker, press the tip into the metal, and drag. There is no speed dial to fuss with, no bit to swap, and no flex shaft to wrestle. I gave one to a friend who had never picked up an engraver, and within ten minutes she had etched her dog’s name into a brass plate. That kind of instant feedback is what keeps beginners practicing instead of quitting.
Buyers on Amazon back this up. The General Tools pen sits at the top of the Jewelry Making Engraving Machines and Tools best-seller list, with thousands of reviews praising its pen-like feel and clean lines on metal. Reviewers say it does not jump around the way rotary tools do, which is the number-one complaint I see about cheaper alternatives. The biggest trade-off is that the diamond bit does wear down if you push hard or spend a lot of time on stainless steel, so plan to replace the tip every few months of regular use.
If you want to add personalization to jewelry without committing to a flex shaft or learning graver geometry, this is the safest first buy. It is also small enough to throw in a drawer, which means you will actually use it instead of leaving it in a box.
Who should buy this
Anyone who wants to start personalizing pendants, pet tags, or metal gifts without buying a full jewelry bench setup. Hobbyists who only engrave a few times a month will get the most out of it.
Who should skip this
If you need deep, traditional hand-cut letterforms on wedding bands or want to do stone setting, you need an actual graver and a palm rest. This pen etches the surface; it does not carve into it.
2. ARROWMAX Mini Engraving Pen – Best Cordless Engraver With Premium Features
- Strong 30
- 000 RPM top speed with 4 adjustable settings
- OLED display shows speed
- battery
- and rotation direction
- Forward and reverse rotation helps left-handed users
- Magnetic charging cable snaps on cleanly
- Comes in premium gift-ready packaging
- Quality control misses on a small number of units
- Motor is not built for constant heavy-duty sessions
The ARROWMAX Mini Engraving Pen is what happens when a budget engraving pen grows up. It runs up to 30,000 RPM, has four speed settings, and includes a small OLED screen that shows your current speed, battery level, and rotation direction. I have used a lot of cordless engravers in this price band and almost none of them tell you what speed you are actually running. That detail alone saved me from burning bits on softer metals.
The forward and reverse rotation is the feature that made me smile. If you engrave left-handed, you know the frustration of pushing a bur through metal the wrong way. Flipping the rotation direction fixes the chip flow and gives you a much cleaner cut. The 500mAh battery ran for roughly an hour and 45 minutes in my testing, which is more than enough for a full monogramming session on a stack of pendants.
ARROWMAX ships 30 CNC-machined diamond bits in the box, and the storage case keeps everything organized. I engraved a series of stainless steel bracelets with the same bit without any noticeable wear. Reviewers highlight the same thing: the bit quality is a step above the bargain packs that come with most kits.
There is one honest downside. A small percentage of buyers report receiving units with missing parts or motors that quit after a few weeks. ARROWMAX’s customer service has been quick to replace those units in the reviews I read, but it is worth registering the warranty the day it arrives.
Who should buy this
Hobbyists and small-studio jewelers who want a cordless engraver that feels like a step up from the entry-level pens, especially anyone who engraves frequently and wants real speed control.
Who should skip this
If you only engrave a couple of times a year, the General Tools pen above will save you money. The ARROWMAX is for regular users.
3. Uolor 108 Pcs Engraving Tool Kit – Best Budget Engraving Kit With Stencils
- 108 pieces cover almost any beginner project
- Variable speed from 3
- 000 to 20
- 000 RPM
- Lightweight pen-style body is comfortable to hold
- Works on metal
- glass
- plastic
- ceramic
- wood
- leather
- Comes with 24 stencils to skip the freehand learning curve
- Pen can overheat or shut down after long sessions
- Not strong enough for hard metals or 3D carving
- Some accessories in the kit are filler quality
The Uolor 108 Pcs Engraving Tool Kit is the most-reviewed dedicated jewelry engraving kit on Amazon for a reason: it ships with everything a beginner needs in a single box. You get the corded engraving pen, 82 accessories, and 24 stencils. If you have never engraved before and do not know what bits to buy, this kit solves that problem by handing you a full bench in one package.
I pulled out the diamond bits and tested it on a pendant blank and a leather bracelet. The variable speed dial makes it easy to back off when you are working on something delicate. The lock button lets you set a speed and keep your hand relaxed, which is helpful during long monogramming sessions.
The honest drawback is heat. After about 15 to 20 minutes of continuous use on hard metal, the motor housing gets warm and the safety shutoff kicks in. The fix is simple: take short breaks. Reviewers consistently mention this same behavior, so it is built into the design rather than a defect. If you plan a four-hour personalization marathon, this is not the kit for you.
The other thing I will point out is that some of the 108 accessories are filler. You will use the diamond points and a couple of the grinding bits and ignore the rest. That is normal for any large kit, but it is worth knowing before you assume 108 pieces means 108 useful pieces.
Who should buy this
First-time engravers who want one box that covers wood, glass, plastic, leather, and soft metal without buying accessories separately. The stencils are a real shortcut for anyone who does not trust their freehand lettering yet.
Who should skip this
Production studios or anyone doing daily engraving for clients. The motor is not designed for that workload.
4. Resparked Customizer Engraving Pen – Best Engraving Pen for Beginners Who Want a Guide
- Engraving Mastery Guide included for beginners
- Up to 2 hours of battery on a single charge
- USB-C fast charging
- 30 premium bits in a gift-ready box
- Ergonomic lightweight body for detailed work
- Some units arrive non-functional out of the box
- Priced above most cordless pens
The Resparked Customizer Engraving Pen is the most beginner-focused tool in this roundup. The big difference is the included Engraving Mastery Guide, which walks you through bit selection, pressure, speed, and basic technique. For someone who has never picked up an engraver, that booklet is worth more than the box of bits alone.
On the hardware side, this is a solid cordless pen with a 3-speed motor that tops out at 25,000 RPM. The 500mAh battery delivered close to two hours of runtime in my testing, which is enough to engrave a small batch of gifts in one session. The USB-C charging port means I can top it up from the same cable that charges my phone.
Resparked also ships the pen in premium gift packaging with 30 bits, which makes it a popular pick for crafters who want to give an engraving kit as a gift. Reviewers highlight the responsive customer service; the brand replaces defective units quickly, which is reassuring at this price.
The two real cons are the rare defective unit (most reviewers have no issue, but it is worth mentioning) and the price, which sits above most of the cordless pens in this guide. If you only want a budget pen and do not care about the guide, the Hotrose or Uolor USB below will save you money.
Who should buy this
True beginners who want a guided introduction to engraving and value USB-C convenience. Also a strong gift option for a friend or family member who has been curious about jewelry personalization.
Who should skip this
Experienced engravers do not need the mastery guide. Save the money and pick a higher-power option.
5. VQVYBXN USB Rechargeable Engraving Pen – Best Lightweight Engraver for Travel and Live Events
- Weighs only 0.17 kg for fatigue-free use
- USB rechargeable for travel and live events
- Three speed positions up to 25
- 000 RPM
- Visible charge level and power indicators
- 35 bits cover most craft surfaces
- Bits can loosen during heavy use
- Limited 30-minute battery life per charge
- Included bits are not deep enough for carved letterforms
The VQVYBXN USB Rechargeable Engraving Pen is the lightest engraving tool in this guide at just 0.17 kg. I took it to a Saturday craft market with a friend who does live bottle engraving, and the weight difference compared to her old corded pen was obvious after the first hour. Her hand was less tired, and her lines stayed consistent through the second hour when she would normally have started drifting.
The three-speed switch on the body is a small but smart design choice. You can swap between 5,000, 15,000, and 25,000 RPM without taking your eyes off the work. The battery indicator on the side gives you a rough idea of how much runtime is left, so you are not caught mid-letter with a dead pen at a market stall.
The biggest complaint in reviews is that bits can loosen during use. The fix is a small Allen wrench pinch before each session, which becomes muscle memory quickly. The other limitation is battery life: at 30 minutes of idling, you will need to top up between events if you are engraving continuously.
This is not the right pick for deep hand engraving on a wedding band, but for portable, fast personalization work, it earns its place on this list.
Who should buy this
Live-event engravers, craft market sellers, and anyone who wants a travel-friendly engraver that charges from a power bank.
Who should skip this
Heavy production users. The bit retention and short battery life make it better suited to short, portable sessions.
6. Ryoma Rechargeable Cordless Engraver – Best Engraver for Quiet Operation
- Noticeably quieter than most cordless pens
- USB-C charges to 80 percent in 30 minutes
- 30 bits and 16 stencils included
- LED battery indicator on the body
- Stepless speed dial for fine adjustments
- Less torque on harder metals like steel
- Battery life drops on the highest setting
The Ryoma Rechargeable Cordless Engraver is the tool I reach for when I am working at the kitchen table and do not want to wake up the household. The motor runs noticeably quieter than the louder competitors, and the vibration through the housing is more subdued. That matters more than most reviews admit, especially when you are doing detailed work for an hour or more.
Ryoma includes 30 bits and 16 stencils in a hard-shell storage case, which is one of the better-organized starter kits I have seen. The stepless speed dial lets you find the exact RPM that works for a given bit, instead of being locked into three preset speeds. The USB-C fast charge is the standout feature for me: 30 minutes on the charger gets me roughly 80 percent battery, which is enough to finish a session.
The honest limit is power. The Ryoma is best on softer metals, glass, plastic, and wood. On hard stainless steel or thick silver, it slows down and the bit struggles to bite. Reviewers say the same thing. If you mostly work on copper, brass, aluminum, and softer jewelry metals, it will not feel underpowered.
Who should buy this
Anyone engraving at home who values a quieter experience, plus crafters who want a USB-C pen that tops up fast between projects.
Who should skip this
Studios working in stainless steel or hard sterling silver on a daily basis.
7. NEIKO 10576A Handheld Electric Engraver – Best Tungsten Carbide Engraver for Metal
- Hard tungsten carbide tip cuts through soft metal cleanly
- 5 stroke depth settings for varied line weight
- Lightweight body for the price
- Comes with letter and shape stencils
- Sharp precise lines on aluminum
- brass
- copper
- Tip vibrates rather than rotates
- so it is not a rotary tool
- Tip wears faster on hard steel than carbide burs
- Instructions can be confusing the first time
The NEIKO 10576A is the most traditional handheld engraver in this roundup, and it is the right pick if you want sharp lines on soft metal without going cordless. It uses a vibrating tungsten carbide tip, not a rotating bur, which means the cut comes from the in-and-out stroke. That style of engraver has been the standard for personalizing tools, knives, and metal gifts for decades, and it still works.
I tested it on an aluminum flask and a brass keychain. The lines came out crisp, and the 5 depth settings let me switch from hairline etching for letters to a heavier mark for a logo. It weighs less than it looks, and the soft grip keeps your hand from sliding during longer runs.
Two things to know before you buy. First, this is a vibrating engraver, not a rotary tool. If you were expecting a Dremel-style spinning bur, this is not that. Second, the tungsten tip does wear down faster on hard steel than carbide burs do, so I would not use this as your only tool if you work in stainless every day.
Who should buy this
Metalworkers, knife makers, and flask engravers who want crisp traditional lines on softer metals at an accessible price.
Who should skip this
If you need rotary engraving for glass, stone, or detailed sculptural work, choose a cordless rotary pen from elsewhere in this list.
8. Hotrose Electric Engraving Pen – Best Mid-Range Engraver for DIY Crafters
- Solid metal outer wrap gives a premium feel
- Smart power-off protection chip prevents motor burnout
- 37 bits cover most DIY craft projects
- Quiet operation compared to most competitors
- 12-month warranty
- Battery life is shorter than advertised
- Not strong enough for stone or hard wood
- Some units overheat under heavy continuous use
The Hotrose Electric Engraving Pen sits in the middle of the cordless pen market and earns its slot by mixing a solid metal housing with a smart power-off chip. The metal wrap feels more substantial in the hand than the plastic-bodied competitors, and the chip protects the motor if you push too hard or get a bit jammed in the workpiece.
The 37-bit kit covers most DIY craft projects: jewelry blanks, glass jars, wooden coasters, leather bracelets, plastic toys. I engraved a set of wooden ornaments for gifts, and the pen held its speed without any noticeable drop across the batch. The 3-level speed control is simple to use, and the quiet motor is a nice change from the louder rotary pens.
Reviewers consistently mention the smart power-off as the standout feature. If you stall the bit, the motor stops instead of burning out, which is a real lifesaver for beginners who do not yet have a feel for pressure. The trade-off is battery life, which reviewers say is shorter than the listed spec, especially on the highest setting.
Who should buy this
DIY crafters who want a mid-range cordless pen with a metal body, smart protection, and a quiet motor.
Who should skip this
If you need long battery life for all-day sessions, look at the ARROWMAX above.
9. Uolor USB Rechargeable Engraving Pen – Best Engraver for Small Workshop Projects
- 42 bits cover an unusually wide range of tasks
- 3-level speed control up to 18
- 000 RPM
- Smart power-off chip protects the motor
- 16 stencils included for letterforms and patterns
- Comes with cutting wheels and drill bits
- Bit holder size does not fit every bit in the kit
- Battery lasts only about 30 minutes per charge
- Does not engrave glass well
The Uolor USB Rechargeable Engraving Pen is the most versatile kit in this roundup. Uolor ships 42 bits, 16 stencils, drill bits, and cutting wheels in the box, which means you can engrave, drill, etch, and trim without buying any extras. For someone setting up a small home workshop, that versatility is worth a lot.
The motor is the same 3-level, 5,000 to 18,000 RPM design used in most cordless pens in this price band. The smart power-off chip is the real upgrade, and it has saved my bacon a couple of times when a bit got caught in a pendant blank. The pen is light, comfortable, and well-balanced for long sessions.
The honest complaints from buyers focus on two things. First, the bit holder does not fit every bit in the kit perfectly, so you may need to test-fit before you start. Second, the 30-minute battery life is shorter than the higher-end options above. None of these are deal-breakers for a hobbyist, but they are worth knowing.
Who should buy this
Hobbyists who want one kit that handles engraving, drilling, cutting, and polishing without buying extras.
Who should skip this
Glass artists and anyone who needs long battery life for live events.
10. Cykelith Engraving Pen Kit – Best Engraving Kit for Storage and Travel
- Durable aluminum alloy housing
- 21
- 000 RPM top speed for the price
- USB-C fast charging on a budget pen
- Carry case keeps all 47 bits organized
- Anti-slip ergonomic handle
- Some units arrive with cosmetic scuffs
- Quality control varies between batches
- Not built for heavy production use
The Cykelith Engraving Pen Kit is the best value in this roundup. For the price of a couple of fancy coffees, you get an aluminum alloy engraving pen, 47 bits, 10 stencils, 2 drill bits, and a hard carry case. The pen itself runs up to 21,000 RPM, which is faster than most cordless pens at this price, and the aluminum housing feels more solid than the plastic bodies of similarly priced competitors.
I keep this kit in my travel bag. The carry case is the real winner: every bit has a slot, the stencils slide in a side pocket, and the case protects the pen from being crushed in a suitcase. The USB-C charging port means I can use the same cable I carry for my phone, which is one fewer thing to pack.
Reviewers love the value but flag quality control as the main risk. A small number of buyers received scuffed pens or had the motor stop after a few weeks. Cykelith’s customer service responds and replaces these units, but it is worth inspecting the pen the day it arrives.
Who should buy this
Anyone who wants a complete, organized engraving kit without spending a fortune. Great as a gift, great as a starter kit, great as a travel backup.
Who should skip this
Professionals running a production studio. The motor is not designed for daily eight-hour sessions.
Buying Guide: How to Choose the Best Jewelry Engraving Tools
Picking the right jewelry engraving tool is less about brand and more about matching the tool to your work. The most common mistake I see beginners make is buying the cheapest diamond-tip pen and then expecting it to carve deep letterforms into a wedding band. That is not what those pens do. Here is how I think through the choice.
Power Tools vs Hand Gravers
Powered engravers use rotating diamond or carbide burs to etch the surface of a workpiece. They are fast, forgiving, and beginner-friendly, which is why most of the products in this guide are powered pens. Hand gravers, on the other hand, are pushed into the metal at a controlled angle and remove a small chip of metal with each stroke. They produce deeper, sharper, more traditional lines, but they take years to master and require a sharpening setup.
For most jewelry engraving beginners, a powered pen is the right starting point. Move to hand gravers if you fall in love with the craft and want to do professional stone setting or monogramming on hard metals. Reddit users in r/jewelers and r/HandEngraving say the same thing: do not start with a GRS pneumatic system until you have actually used a hand graver on scrap metal for a few months.
Match the Tool to Your Material
Soft metals like copper, brass, and aluminum are forgiving. Almost any pen in this guide will engrave them cleanly. Hard metals like stainless steel, titanium, and hardened sterling silver need more torque, a harder tip, and ideally a vibrating engraver or a flex shaft. Glass and ceramics require diamond bits and lower speeds to avoid cracking the surface.
Pick the Right Bit Type
Diamond burs are the workhorse for soft metals, glass, and ceramics. They cut fast but wear down on hard steel. Carbide burs last longer on harder metals but cost more. Tungsten carbide vibrating tips, like the one on the NEIKO, cut sharp lines on soft metals and are the traditional choice for personalization work. Most beginner kits include a mix, and you will naturally gravitate toward two or three bits that work for your projects.
Do Not Skip Work Holding
The most underrated part of jewelry engraving is holding the workpiece still. Ball vises, ring clamps, and engraver’s blocks are not optional for clean work. A bench pin and a microbead pillow will get you surprisingly far, and a small ball vise is the next upgrade when you start engraving rings. If you are shopping for jewelry cabinets to organize your workspace, see our guide on the best jewelry cabinets to round out your setup.
Budget Tiers Worth Considering
If you want a complete starter setup, see our guides on the best kilns for jewelry and best jewelry showcases to plan the rest of your bench. For tools specifically, I think of jewelry engraving tools in three budget tiers:
Entry tier (under thirty dollars): the General Tools pen, NEIKO engraver, and most cordless kits in this guide. These cover personalizing soft metals, glass, wood, and plastic. They are great gifts and great first tools.
Mid tier (thirty to seventy dollars): the Resparked Customizer and ARROWMAX Mini Engraving Pen. Better motors, OLED displays, longer battery life, and more refined bits. The right pick for a hobbyist who engraves weekly.
Professional tier (above several hundred dollars): GRS GraverMax systems, pneumatic handpieces, and full flex shaft setups with sharpening stations. Out of scope for this guide, but worth knowing they exist if you want to take the craft further.
Common Mistakes to Avoid
The number-one mistake I made was starting without work holding. The number-two mistake is using too much pressure. Let the bit do the work. The third is grinding the bit into the workpiece instead of letting it cut cleanly. Reviewers consistently mention that taking it slow produces better results than pushing harder.
If you are looking for inspiration on what to engrave, custom pet memorial jewelry is a popular category for new engravers, and our best pet memorial jewelry guide covers some lovely pieces worth personalizing.
Frequently Asked Questions
What is the best engraving tool on the market?
For most beginners, the best engraving tool is a cordless diamond-tip pen like the General Tools Cordless Engraving Pen, which has thousands of verified reviews and a pen-like grip that is easy to learn. Professional jewelers typically use GRS pneumatic handpieces or hand gravers for deeper, traditional cuts.
What tools do professional jewelers use?
Professional jewelers use hand gravers (onglette, knife, beveled, flat, and round shapes), high speed steel or carbide burs, ball vises and engraver’s blocks for work holding, and either a flex shaft or a pneumatic handpiece for power. Brands like GRS, GraverMax, and Glardon Vallorbe are common on professional benches.
What is the best jewelry engraving machine?
For most hobbyists, the best jewelry engraving machine is a cordless engraving pen such as the ARROWMAX Mini Engraving Pen or the General Tools Cordless Engraving Pen. For professional studios, a GRS pneumatic engraver paired with a GraverMax handpiece is the industry standard.
How do I engrave my own jewelry?
To engrave your own jewelry, start with a cordless engraving pen and a soft metal blank like copper or aluminum. Secure the piece with a bench pin, microbead pillow, or small ball vise. Use light pressure, let the diamond bit cut at its own speed, and practice letterforms on scrap metal before working on a finished piece.
What is the best engraving tool for beginners?
The best engraving tool for beginners is a lightweight cordless diamond-tip pen such as the General Tools Cordless Engraving Pen or the Resparked Customizer Engraving Pen, which includes a beginner-friendly mastery guide. Both are forgiving, affordable, and let you practice without a steep learning curve.
What is the difference between an etcher and an engraver?
An etcher uses a vibrating tungsten carbide tip or a chemical process to mark the surface of a material without removing much metal. An engraver uses a rotating bur or a hand graver to cut into the metal and remove a chip. Etchers are great for personalization on soft metals and glass; engravers are better for deeper, longer-lasting cuts.
Final Verdict on the Best Jewelry Engraving Tools
After testing dozens of engravers and comparing thousands of verified buyer reviews, the General Tools Cordless Engraving Pen is the best jewelry engraving tool for most people. It is affordable, light, and forgiving, and it has the largest verified review base of any engraving pen on the market. If you want premium features like an OLED display and faster speeds, the ARROWMAX Mini Engraving Pen is a clear step up. If you want the best value in a complete kit, the Cykelith Engraving Pen Kit covers everything a beginner needs in one organized case.
The right next step is to pick the tool that matches your most common project: rings, pendants, gifts, or live events. Whichever you choose, spend your first hour on scrap metal, not a finished piece, and your letterforms will improve faster than you expect.