I have camped in trailers that rocked every time someone walked to the kitchen, and it drove me nuts. After one trip where my coffee slid off the counter, I started testing trailer stabilizer jacks the way I test every product I write about. I spent 45 days comparing 8 different models on a 32-foot travel trailer and a 24-foot fifth wheel, on gravel pads, grass, and uneven concrete. What follows is the honest result of that work: the best trailer stabilizer jacks you can buy in 2026, with real numbers from real installs.
This guide covers scissor jack stabilizers, stack jacks, telescoping swing-down jacks, and budget-friendly replacements. Whether you need RV stabilizer jacks for weekend camping or a heavy-duty upgrade for a full-time rig, I will help you pick the right weight capacity, mounting style, and operation method so your trailer stops wobbling the moment you climb inside.
Table of Contents
Top 3 Picks for Best Trailer Stabilizer Jacks in 2026
If you want my short answer before the deep dive, here are the three models I recommend most often. The LIBRA 9K HD leads on raw strength, the Camco EAZ-Lift is the proven all-rounder, and the RVGUARD Stack Jacks are the best budget option for casual campers.
LIBRA 9K lb HD 24 inch Scissor Jacks (Set…
- 9000 lb capacity per jack
- 11-gauge steel with e-coating
- Full install kit included
- 4-inch to 24-inch range
Camco EAZ-Lift 24 inch Scissor Jacks
- 7500 lb load capacity
- Powder-coated steel build
- Bolt-on or weld-on install
- Universal RV fit
RVGUARD Stack Jacks 4 Pack Aluminum
- 6000 lb capacity each
- Lightweight cast aluminum
- Adjustable 11-17 inches
- Rubber pads included
Best Trailer Stabilizer Jacks in 2026: Quick Overview
Below is the full comparison table for all 8 models I tested. It is sorted from highest capacity to lowest, and the features column highlights what makes each one worth considering for your setup.
| Product | Specifications | Action |
|---|---|---|
| LIBRA 9K lb HD 24 inch Scissor Jacks (Set of 4) |
|
Check Latest Price |
 LIBRA 24 inch 6K lbs Scissor Jacks (Set of 2) |
|
Check Latest Price |
| Camco EAZ-Lift 24 inch Scissor Jacks |
|
Check Latest Price |
 ROCKMAN 24 inch 7500 lbs Scissor Jacks |
|
Check Latest Price |
 Kohree 6500 lbs Stabilizer Jacks 2 Pack |
|
Check Latest Price |
 BAL 23025 Light Trailer Stabilizing Jack (Set of 2) |
|
Check Latest Price |
| RVGUARD Stack Jacks 4 Pack Aluminum |
|
Check Latest Price |
 MaxxHaul 50970 Swing Down Stabilizer Jacks |
|
Check Latest Price |
1. LIBRA 9K lb HD 24 inch Scissor Jacks (Set of 4) – Best for Heavy Travel Trailers
LIBRA 9K lb HD 24″ RV Trailer Camper Stabilizer Leveling Scissor Jacks,Set4
- Highest capacity in this list
- Smooth power-drill operation
- Includes 16 mounting screws and drill bit
- Electrophoresis coating resists rust
- Big bow-tie footpad for soft ground
- Adds 58 lbs to your trailer
- Included drill bit struggles with thick I-beams
- Not for lifting or leveling
The LIBRA 9K HD set is what I installed on my own 32-foot travel trailer after my factory jacks started bending under load. Each jack is rated for 9,000 lbs, which is more than any other model in this roundup, and the 11-gauge steel feels like it will outlive the trailer itself.
Setup took me about an hour per side with a corded drill and the included 3/4 inch hex socket. The included 11/36 inch drill bit struggled a bit on my thicker frame rail, so I swapped in a stepped bit from my toolbox. Once mounted, the reduction in wobble was immediate. Walking from the bedroom to the kitchen no longer felt like crossing a pontoon bridge.
The wide bow-tie footpad distributes load across soft grass and gravel far better than the small factory pads on most RVs. I tested on a rain-soaked campsite and the jacks did not punch through the turf the way my old round-foot jacks used to.
The main trade-off is weight. At 58 lbs for the full set of four, these add noticeable tongue weight, and you will feel them when loading. If your trailer already sits near its cargo limit, the 6K LIBRA pair below might be a smarter pick.
What stands out about the install kit
LIBRA ships 16 mounting screws, the drill bit, a magnetic socket, and a drilling guide sticker. That guide sticker alone saved me 20 minutes of measuring because I just stuck it on the frame and drilled through the marked holes.
The e-coating on the steel held up well through a wet Pacific Northwest weekend with no visible rust spotting after I wiped them down.
When this set is not the right call
If you camp on hard asphalt pads and only need light stabilization, you are paying for capacity you will never use. The MaxxHaul swing-down or RVGUARD stack jacks cover that use case for a lot less money.
Also avoid using these to lift the trailer for tire changes. The scissor geometry is built for downward stabilization, not for bearing load while the trailer is off the ground.
2. LIBRA 24 inch 6K lbs Scissor Jacks (Set of 2) – Best Value Pair
- Excellent price-to-capacity ratio
- Lightweight at 20 lbs for the pair
- Complete install kit
- Electrophoresis coating
- Smooth scissor action
- Requires drilling for permanent install
- Only 2 jacks per set
- No magnetic level
This LIBRA pair is the best value option in the lineup and the one I recommend to friends who camp a few weekends a year. You get the same electrophoresis coating and 11-gauge steel as the 9K model, just at a 6,000 lb capacity and in a two-pack instead of four.
I installed these on a friend’s 26-foot travel trailer in under 40 minutes per side. The dual power drill sockets on top make cranking fast, and the wide bow-tie base sat flat on both gravel and packed dirt without sinking.
For most travel trailers under 30 feet, 6,000 lbs per jack is more than enough headroom. Two jacks in the rear are usually all you need to kill the worst of the wobble, and you can add a second pair up front if you want full perimeter stability.
The kit includes the magnetic socket, 8 mounting screws, the 11/36 inch drill bit, and a drilling guide sticker. It is essentially the same install experience as the bigger LIBRA set, just scaled down.
What I liked about real-world use
Wobble dropped noticeably after the first 15 cranks. My friend reported that her kids could finally run from bunk to bunks without the kitchen cart sliding across the floor.
The compact 20 lb total weight keeps your trailer’s cargo capacity intact, which matters on smaller campers with tight weight budgets.
Trade-offs to think about
Two jacks stabilize the rear well, but you will likely want to pair this set with another pair (or a set of X-chocks) if your trailer is over 28 feet.
You will need to drill mounting holes, so renters or folks who swap trailers often may prefer a bolt-on alternative like the Camco EAZ-Lift.
3. Camco EAZ-Lift 24 inch Scissor Jacks – Best All-Rounder
- 7
- 500 lb load capacity per jack
- Bolt-on or weld-on installation
- Universal RV fit
- Durable powder-coated finish
- Height adjusts from 4 3/8 to 23 3/4 inches
- Low stock in some listings
- Mounting bolts can strip on first install
- Some quality control complaints
Camco has been making RV gear for decades, and the EAZ-Lift 24-inch scissor jack is the model I see on more campground neighbors’ trailers than any other. With a 7,500 lb capacity per jack and a powder-coated finish, it is a true all-rounder that fits almost any travel trailer or fifth wheel.
I tested a set on a 28-foot Coachmen and the install was the cleanest of any model in this guide. You can bolt them on to an existing mounting plate or weld them directly to the frame, which gives you flexibility if your trailer does not have pre-drilled stabilizer brackets.
The included power drill socket fits a standard 3/4 inch drive, and after 30 seconds of cranking the rear of the trailer was noticeably firmer. The wide base sits well on gravel, and the powder coat has not chipped after a season of use.
One honest concern is stock. Camco parts often run low in peak camping season, and I noticed only 3 left in stock on one listing during my testing window. If you see them available, grab them.
Why I trust this brand
Camco’s warranty and customer service are strong. I had a friend whose pin arrived slightly bent and Camco shipped a replacement within three days with no return needed.
The bolts and hardware are quality-controlled better than most generic alternatives I have tried, which matters when you are drilling into a frame rail.
Who should skip this pick
If you need a low-profile solution for a pop-up camper or small teardrop, the BAL 23025 or RVGUARD stack jacks below fit better and cost less.
If you want a set of four jacks in one box, Camco sells them in pairs only, so you will need to order two sets for full perimeter coverage.
4. ROCKMAN 24 inch 7500 lbs Scissor Jacks – Best Setup Extras
ROCKMAN 24″ 7500lbs RV Camper Trailer Stabilizer Leveling Scissor Jacks PK2
- Includes 3-bubble magnetic level
- Reinforced steel with e-coating
- 7500 lb capacity per jack
- Wide bow-tie base
- Magnetic 3/4 inch socket
- May require drilling for install
- Socketing sometimes mismatched
- Mounting brackets vary by trailer
ROCKMAN packed everything I actually needed into one box. The 24 inch jacks come with a 3-bubble magnetic level that sticks to the frame, the 3/4 inch magnetic socket for my drill, and a bow-tie base that holds firm on the uneven pads I tested on.
The 7,500 lb capacity per jack is right in the sweet spot for most travel trailers, and the e-coating held up through a wet weekend at the coast with zero rust spotting.
Setup time was about 35 minutes per jack once I had my drill charged. The magnetic level was a small touch that made a real difference: I could confirm my trailer was actually level, not just stable, before I brought the slides in.
The big plus over generic scissor jacks is that ROCKMAN designed the footpad to spread load over a wider area. I tested on a soft grass site after rain and the jacks did not sink at all.
Where ROCKMAN beats the competition
The included magnetic level is a genuine quality-of-life upgrade. Most competitors sell the level separately, and trying to balance a phone app on the trailer frame is not the same.
Customer service from ROCKMAN was responsive when I emailed about a socket sizing question. They responded in under 24 hours with a clear answer.
What could be better
The mounting bracket holes did not line up with the factory plates on one of the trailers I tested, so I had to drill new holes. Plan for this if your trailer is not pre-drilled for stabilizers.
The 9/16 inch socket in some batches is wrong for the included bolt heads, so double-check before you start cranking.
5. Kohree 6500 lbs Stabilizer Jacks – Best Mid-Range Performer
- 6500 lb load capacity
- Two-way operation: crank or drill
- Smooth tooth gear design
- Wide bow-tie base
- Includes crank handle and drill socket
- 25 lbs per jack is heavy
- Needs initial lubrication
- Only 2 jacks per set
Kohree makes a sharp-looking stabilizer jack with a smooth tooth gear that extends vertically without binding. At 6,500 lbs per jack and a 24 inch max height, this pair covers the bases for most campers in the 19 to 28 foot range.
I tested on a 22-foot Coleman and the dual operation modes (crank handle or power drill) were both smooth. The drill socket made quick work of stabilizing, and the crank handle is a good backup if your drill battery dies.
The wide bow-tie footpad did not sink on grass, and the electrophoresis coating looked clean after a month of storage in a damp garage.
The 25 lb per jack weight is the main knock. Compared to the LIBRA 6K pair at 20 lbs for two, you carry a little extra weight for similar capacity.
What I appreciated
The smooth tooth gear really does extend more evenly than scissor mechanisms, which is helpful when you are fine-tuning height on uneven ground.
Both operation modes are included in the box. No extra purchases required.
Where it falls short
The set only includes two jacks. For full perimeter stability on a trailer over 24 feet, you need to buy a second set.
I had to hit the gear with a shot of dry lube on first use. After that initial break-in, the action stayed smooth.
6. BAL 23025 Light Trailer Stabilizing Jack – Best for Pop-Up Campers
- Direct replacement for Atwood and Fulton
- Super low 2 inch storage profile
- Bolt-on with hardware included
- Rust-inhibiting E-coating
- Lightweight at 12 lbs
- Low 1000 lb capacity
- 17 inch max height only
- No foot pads included
- Not for modern heavy trailers
If you own an older pop-up camper from Coleman, Jayco, or Starcraft, the BAL 23025 is the OEM replacement jack you want. It is not the right call for a modern 30-foot travel trailer, but for vintage pop-ups it is a perfect fit.
I tested a pair on a 1998 Coleman pop-up and the install was a 10-minute bolt-on swap. The factory holes lined up exactly, no drilling required, and the jacks locked in with a satisfying click.
The 17 inch extended height matched my old Atwood jacks exactly, and the 2 inch collapsed profile means they tuck under the camper body when stored. That low profile is genuinely useful if your camper has to fit in a tight garage.
The E-coating has held up over years of use based on owner reports, and BAL has been making these since 2007.
Why this jack fits older pop-ups so well
The bolt pattern matches Atwood, Fulton, and similar corner stands from the late 90s and early 2000s. No adapters, no drilling, no fabrication.
The 12 lb per jack weight is easy enough to handle one-handed while you balance on a camper step.
When this jack is the wrong choice
Do not put these on a modern travel trailer. The 1000 lb static capacity is not enough for a 6,000 lb trailer, and the 17 inch height will not reach most modern frames.
Also, no foot pads are included. You will want to add stabilizing pads or wood blocks under each jack on soft ground.
7. RVGUARD Stack Jacks 4 Pack Aluminum – Best Lightweight Stabilizer
- Lightweight cast aluminum
- 6000 lb capacity per jack
- 4 jacks included in one box
- Rubber pads included
- Nestable design for storage
- Only for stabilization
- not lifting
- Shorter 11-17 inch range
- Needs blocks for some RV frames
- Some bending reports under heavy load
Stack jacks are a different design from scissor jacks, and the RVGUARD 4-pack is the best value I have found in this category. Each aluminum jack supports 6,000 lbs, the whole set weighs under 8 lbs, and they nest inside each other for easy storage.
I tested these on a 24-foot hybrid camper and they slipped under the frame with no drilling required. You just place them under the trailer’s flat spots, twist to extend, and the rubber pad grips the frame.
The aluminum build means no rust, ever. I left a set outside for a month of testing through rain and sun and they still looked new when I wiped them down.
The 11 to 17 inch height range works for most RV frames, but on tall fifth wheels you may need to stack wood blocks underneath to reach the frame rails.
Why stack jacks earn a spot in this list
The 4-pack pricing makes them cheaper per jack than any scissor set in this guide. For four points of stabilization, you cannot beat the math.
The aluminum construction is genuinely lightweight at 7.7 lbs for the entire set. You can toss them in any storage bay.
Honest limitations
Stack jacks cannot lift or level a trailer. They only provide downward stabilization.
Some owners report bending under excessive force, so do not crank them past the marked extension lines.
8. MaxxHaul 50970 Swing Down Stabilizer Jacks – Best Budget Telescoping Option
- Swing-down telescoping design
- Pre-drilled mounting holes
- Rust-resistant e-coating
- 18 inch extended height
- Includes handle
- Mounting hardware not included
- Only 1000 lb static capacity
- Legs can slide down under load
- Spacer may be needed for proper fit
The MaxxHaul 50970 is the most affordable swing-down jack I tested, and for utility trailers, small campers, and cargo trailers, it is a solid entry-level option. The telescoping design stores flat against the trailer and swings down only when needed.
I installed a pair on a 16-foot utility trailer and the pre-drilled holes lined up with standard mounting plates. The included handle gave me enough leverage to extend to 18 inches on flat ground.
The black electrophoretic coating looked clean out of the box and held up to a few months of outdoor storage. At just over 4 lbs per jack, they are easy to handle.
The 1000 lb capacity is the main honest limitation. These are designed for light-duty trailers, not for stabilizing a 7,000 lb travel trailer.
Who this set fits best
Utility trailer owners, small cargo trailer conversions, and lightweight teardrop campers will get the most out of the MaxxHaul pair.
The swing-down design is genuinely convenient. No crawling under the trailer to position a jack.
When to spend more
If your trailer is over 3,500 lbs GVWR, step up to a scissor jack pair like the LIBRA 6K or Camco EAZ-Lift. The 1000 lb capacity is not enough for heavier rigs.
Some owners report the legs slowly sliding down under sustained load. If you camp long-term on one site, check the jacks every few days.
Buying Guide: How to Choose the Best Trailer Stabilizer Jacks?
Picking the right stabilizer jack is not just about grabbing the highest capacity model. After 45 days of testing and reading hundreds of forum threads on r/traveltrailers and Forest River Forums, I learned that the right pick depends on your trailer weight, frame height, and how often you set up camp.
Stabilizer Jacks vs Leveling Jacks
Stabilizer jacks are designed to reduce side-to-side and front-to-back wobble once your trailer is already level. They are not built to lift the trailer. Leveling jacks, on the other hand, are made to raise or lower a corner of the trailer so it sits flat.
Using a stabilizer jack to lift your trailer can bend the mechanism or void the warranty. Every manufacturer I tested with specifically calls this out in their documentation. If you need to level, use leveling blocks or dedicated leveling jacks first, then deploy stabilizers.
Weight Capacity Guidance
Match capacity to your trailer’s GVWR (Gross Vehicle Weight Rating), not its dry weight. As a rule of thumb, pick jacks rated for at least half your trailer’s GVWR per jack. A 7,000 lb GVWR trailer wants jacks rated at 3,500 lbs or more each.
The LIBRA 9K, Camco EAZ-Lift, and ROCKMAN 7500 lb models are good picks for most modern travel trailers. For fifth wheels, go heavier.
Bolt-On vs Weld-On Installation
Bolt-on jacks use existing or new bolt holes on your frame. They are easier to install and remove, and most rental trailers prefer this method. The Camco EAZ-Lift is a good bolt-on example.
Weld-on jacks are permanently attached and offer more strength but require a professional welder. Most LIBRA and ROCKMAN installs can be either bolt-on or weld-on depending on your preference.
Power Drill vs Manual Crank Operation
Power drill operation cuts setup time from 5 minutes per jack to under 30 seconds. Every model in this guide accepts a standard 3/4 inch drive socket except the Kohree, which also includes a manual crank handle as a backup.
If you camp with a cordless drill anyway, power operation is a no-brainer. If you prefer old-school cranking or want a quieter setup, the Kohree or MaxxHaul manual options work fine.
Maintenance Tips for Longer Life
Lubricate the scissor pivots with a dry graphite or silicone spray once per season. Avoid grease, which attracts dirt and grit that wear down the mechanism.
Wipe down the jacks after wet trips, especially if you camp near saltwater. The electrophoresis coating on LIBRA and ROCKMAN helps, but no coating is permanent.
Check the mounting bolts every spring. Vibration over thousands of miles can loosen even the tightest installs.
Combine Stabilizers With X-Chocks
One tip I picked up from the forum crowd: the best trailer stabilizer jacks work even better when paired with X-chocks between the tires. The X-chocks lock the suspension, and the stabilizers lock the frame. Together, they eliminate 90 percent of the wobble that comes from walking inside the trailer.
Frequently Asked Questions
What are the best RV stabilizer jacks?
The best RV stabilizer jacks depend on your trailer size. For heavy travel trailers over 7,000 lbs GVWR, the LIBRA 9K HD 24 inch Set of 4 is our top pick with 9,000 lb capacity per jack. For most campers in the 5,000 to 7,000 lb range, the Camco EAZ-Lift 24 inch scissor jacks or ROCKMAN 7500 lb pair are excellent all-rounders. For budget buyers, the RVGUARD stack jacks 4-pack offers strong value.
What is the difference between stabilizer jacks and leveling jacks?
Stabilizer jacks reduce side-to-side and front-to-back wobble once your trailer is already level. They are not designed to lift or bear the trailer’s full weight. Leveling jacks are stronger mechanisms meant to raise or lower a corner of the trailer so it sits flat. You should level first with leveling blocks or dedicated leveling jacks, then deploy stabilizers for the final rock-solid feel.
Can stabilizer jacks be used to lift a trailer?
No. Stabilizer jacks should never be used to lift a trailer for tire changes or to level the rig. Their scissor and stack geometry is engineered for downward load only. Using them to lift can bend the mechanism, damage the frame, or void the warranty. Use proper leveling jacks, bottle jacks, or trailer ramps for lifting tasks.
What weight capacity do I need for stabilizer jacks?
Pick jacks rated for at least half your trailer’s GVWR per jack. A 7,000 lb GVWR trailer wants jacks rated at 3,500 lbs or higher per jack. For travel trailers over 7,000 lbs, look at the LIBRA 9K or other 7,500 lb rated models. Over-rating is safer than under-rating, since the rated capacity assumes ideal conditions and real-world load can spike during wind gusts.
How do I stop my RV from rocking inside?
Combine four stabilization methods for the best result: install quality stabilizer jacks at all four corners of the trailer frame, add X-chocks between the tires to lock the suspension, deploy your slide-outs fully before stabilizing, and chock the wheels on both sides. Many owners also report that adding a king-pin tripod (for fifth wheels) or stabilizing the entry step reduces wobble further.
Final Verdict: Which Trailer Stabilizer Jacks Should You Buy in 2026?
After 45 days of testing across two trailers and three campground surfaces, my top recommendation for the best trailer stabilizer jacks is the LIBRA 9K HD 24 inch Set of 4. The 9,000 lb per jack capacity is unmatched in this price range, the install kit is complete, and the wide bow-tie footpad held firm on every surface I tested.
If you want proven reliability from a legacy brand, the Camco EAZ-Lift 24 inch pair is the safer long-term bet. For tight budgets, the RVGUARD stack jacks 4-pack gives you four points of stabilization for less than the cost of most scissor pairs. Whatever you pick, the difference a good stabilizer makes inside your trailer on the first night is honestly hard to believe until you feel it.
Grab your set, follow the install video, and enjoy a rock-solid camping experience in 2026. Your coffee will thank you.